IO Link Amplifier for strain gauge sensors
IO Link Amplifier for strain gauge sensors
The CD1-SG-IO-Link amplifier for strain gauge sensors represents a real evolution compared to traditional amplifiers with analog output (0-10 V, 4-20 mA).
While conventional analog solutions remain limited by issues of accuracy, transmission noise, and configuration complexity, IO-Link is now establishing itself as the new industry communication standard.
Thanks to this point-to-point digital protocol, signals from sensors are transmitted without loss and without the risk of electromagnetic interference, ensuring reliable and repeatable measurements. In addition, IO-Link incorporates numerous features such as remote parameterization and simplified integration into modern automation systems, significantly reducing maintenance costs and improving productivity.
In brief :
- Direct reading and dynamic measurements (peak, etc.)
- 1 input for 4- or 6-wire strain gauge force or torque sensor.
- Accuracy: 0.05% of full scale (CD1-SG-IO-Link only)
- Transmission speed of 230.4 kbaud (COM 3 mode)
- 4800 Hz sampling with several filtering options
- Suitable for use in the most demanding industrial environments, thanks to its machined aluminum housing and electronic design.
- Direct reading and dynamic measurements (peak, etc.)
- 1 input for 4- or 6-wire strain gauge force or torque sensor.
- Accuracy: 0.05% of full scale (CD1-SG-IO-Link only)
- Transmission speed of 230.4 kbaud (COM 3 mode)
- 4800 Hz sampling with several filtering options
- Suitable for use in the most demanding industrial environments, thanks to its machined aluminum housing and electronic design.
The CD1-SG-IO-LINK is designed in a machined aluminum housing, offering exceptional robustness and an IP67 protection rating, ensuring perfect resistance to harsh industrial environments.
Its installation is simple and flexible: it can be fixed from above using 4 M4 screws, or from below with 4 M5 screws, depending on the mounting constraints.
|
Input type |
4-wire or 6-wire strain gauge |
|
Connectivity |
IO Link side: M12 - 4-pin male |
|
Measurement modes |
Live, Min , Max |
|
Converter resolution |
32 Bits |
|
Sampling rate |
4800Hz |
|
Measurement accuracy |
0,05% Full scale (product only) |
|
|
|
|
Indicator light |
1 LED |
|
Protection rating |
IP67 |
|
Construction |
Machined and anodized aluminum housing |
|
Mounting |
- 4 holes for M4 screws for top mounting |
|
Dimensions |
28x90x20 mm, weight 78g |
|
Transmission speed |
COM 3 Mode (230,4 kBaud ) |
|
Minimum cycle time |
1,3ms |
|
Process data inputs (PD In) |
17 bytes :
- live mesure = float 32 Bits = 4 Bytes, - measure Min = float 32 Bits = 4 Bytes, - measure Max = float 32 Bits = 4 Bytes, - Temperature = float 32 Bits = 4 Bytes, - 1 status byte ( < tolerance, OK, > tolerance ) |
|
Parameters |
- Start dynamic measurement |
|
IO Link version |
1.1 |
|
Location |
Yes |
|
Device status |
Yes: |
|
Reset command |
Yes |
